HOMCOM 850-223V90 Manual page 25

Icon Description
Current time
Present day is Monday
Timing mode
Example 6:00-22:00
Current operating position: flashes
Choose P mode (P1–P7) and week. Example:
Choose P1 and set week.
► P. 12, item 9
– Press model icon [ ] 3s untill flashes [09].
► P. 12, item 10
– Then press mode icon [ ], flashes [30].
► P. 12, item 11
– Press mode icon [ ]. Flashes [1] and press [+]
set Tuesday.
► P. 12, item 12
– Press model icon [ ].
► P. 12, item 13
– Press mode icon [ ] 5s untill 1 changes to [00].
Press [+] and [–] to revise P1 mode (Press [+] to
run Comfort mode and press [–] to run Economy
mode).
► P. 12, item 14
– After choosing the mode you need then press
model icon [ ] to exit.
► P. 12, item 15
– Press mode icon [ ] can revise other modes
(P1–P7), 1 presents Monday and press mode
icon [ ] to Sunday, press [+] and [–] to revise
other modes, then press mode icon [ ] to exit. if
no operation for 30s, it will jump to time mode set.
► P. 12, item 16
– Press mode icon [ ] to return to time mode.
P1–P7 mode
► P. 13, item 17
– P1: Comfort mode 6:00–22:00 (except above
time period, runs Economy mode)
► P. 13, item 18
– P2: Comfort mode 19:00–6:00 (except above
time period, runs Economy mode)
► P. 13, item 19
– P3: Comfort mode 6:00–9:00 and 16:00–22:00
(except above time period, runs Economy mode)
► P. 13, item 20
– P4: Comfort mode 6:00–9:00 and 12:00–14:00
and 16:00–22:00 (except above time period, runs
Economy mode)
► P. 13, item 21
– P5: Economy mode 0:00–24:00
► P. 13, item 22
– P6: Comfort mode 0:00–24:00
► P. 13, item 23
– P7: Comfort mode 16:00–22:00 (except above
time period, runs Economy mode)
Child lock
To avoid misoperation,end user can set child lock to
lock current mode.Press [+] and [–] at same time 5s
until Child lock icon [
locked; except end user press on/off icon [ ], other
operations are invalid. If dismiss child lock, press [+]
and [–] at same time 5s until Child lock icon [
lights off.
Internal setting and description
Press [+] 5s in power off state, enter into internal set-
ting, then short press [ ] to switch mode, press [+]
and [–] to set.
Temperature compensation setting (F0) – Window
open detection (F1) – Anti-scald (F2) – [0] presents
off in power off state.
Window open detection:
[0] means window open detection is off.
In heating state, when environment temperature
drops 2 °C within 5mins, indicating the window is
open, Window open detection is start (when unit
works in Defrost mode). The unit stops heating for 65/
90mins, then enter into previous mode. If environ-
ment temperature drops 2 °C, within 5mins again,
Window open detection starts again and heating
stops for 65/90mins again. Run in this cycle.
► P. 13, item 24
– On stand by mode, press [+] 5s.
► P. 14, item 25
– Temperature compensation setting when tem-
perature is not correct. Press [+] when in power
off state into the temperature compensation set-
ting, the range is from 5 °C to -5 °C,short
press [ ] to exit current setting.
► P. 14, item 26
– Press [+] to start open window detection, end
user ca re-start heating timing set, choose
from [0], [65], [90] mins; after setting, short
press [ ] to switch to other modes.
► P. 14, item 27
– Press [–] set [0] to stop open window detection.
► P. 14, item 28
– Press [+] to rise temperature and press [–] to
reduce product temperature, choose
from [0], [40], [45], [50], [55] [60] °C; after set,
short press [ ] to switch to other modes.
► P. 14, item 29
– Press [–] set [0] to stop anti-scald.
► P. 14, item 30
– After set, short press [ ] to exit internal setting.
Power failure memory function:
If into power failure suddenly,the working state is lock
at the moment of power failure; when into power on,
it automatically restore previous mode, except timing
mode need to be reset, other modes saved.
Restore factory setting:
The system will start to restore the factory setting
automatically and enter into the power off states
when press the [ ] 10s. Then press [ ] and the
temperature is 19 °C in comfort mode, the tempera-
ture is 15.5 °C in the economy mode. The time
EN
] lights on, current mode is
]
25