3.1.4
Wall mounting
3.1.4.1
Vertical wall mounting
Note
The device must be installed on the plate of an enclosure.
Requirement
• 2 mounting brackets
• 2 screws
• T8 screwdriver
Procedure for mounting
1. Lay the mounting brackets on the rear of the device.
2. Fasten the brackets with supplied screws.
3. Mark the bore holes, drill the required holes in the wall and fasten the device to the wall using
two screws.
SITRANS CC220 and SITRANS MS200
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA
3.1 Installation instructions SITRANS CC220
Installing/mounting
29