Table of Contents
Advertisement
Service and maintenance
Cleaning the device
The TCU is designed for low-maintenance operation.
Preparation
Note
Clean the TCU only when it is switched off.
For cleaning, use a soft cloth moistened either with water or a mild cleaning agent. Use only
dish soap as cleaning agent.
Procedure
Do not spray the cleaning agent directly on the TCU, but rather on a cleaning cloth. Never use
caustic solvents or abrasive cleaners.
Note
Do not clean the TCU using compressed air or steam jets because they can damage it.
Checking the device
In order to prevent foreign bodies or liquids entering the TCU, regularly check the device:
• Ensure that all the housing screws are in place and tight
• For damage to the housing
• For damage to the cable cover or cable entry
Protect the device from environmental effects
Protect the TCU against:
• Direct sunshine and heat sources
• Mechanical vibration and shock
• Dust
• Humidity
• Strong magnetic fields
Suspected malfunction
If you suspect a malfunction due to unusual feedback messages, immediately isolate the device
from power and inform qualified personnel to check for proper functioning.
TCU 30.3
Equipment Manual, 03/2023, A5E40874197B AD
7
77
Advertisement
Table of Contents
