Replacing Sitrans Ms200 - Siemens SITRANS SCM IQ Compact Operating Instructions

Service and maintenance
6.3 Maintenance and repair work for SITRANS MS200
10.Put the battery holder cap
in.
11.Connect the battery connector
⇒ The LED placed on the PCBA lights up for one second.
12.Place the lid
SITRANS MS200 is now active again.
6.3.3

Replacing SITRANS MS200

Humid environment
• If working on an energized device is necessary, ensure that the environment is dry.
• Make sure when carrying out cleaning and maintenance work that no moisture penetrates
Hot surfaces
Risk of burns during maintenance work on parts having surface temperatures exceeding 65 °C
(149 °F).
• Take corresponding protective measures, for example by wearing protective gloves.
• After carrying out maintenance, remount touch protection measures.
Replacing a defective SITRANS MS200
1. Stop anomaly detection models of the respective SITRANS MS200.
2. Replace defective SITRANS MS200 with new SITRANS MS200.
3. Make sure new SITRANS MS200 is powered up.
4. Disconnect defective SITRANS MS200 in SITRANS SCM IQ.
5. Connect new SITRANS MS200 with SITRANS SCM IQ and assign sensor to existing
MindSphere asset.
For detailed description see AUTOHOTSPOT.
6. Train new anomaly detection model based on new SITRANS MS200 data.
Repositioning SITRANS MS200 on the same machine
Note
In this scenario SITRANS CC220 and MindSphere asset remain the same.
56
①
on SITRANS MS200 and screw it on to 6-7 Nm per hand.
WARNING
the inside of the device.
CAUTION
⑦
back on. Ensure that the battery holder cap is correctly snapped
③
.
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA
SITRANS CC220 and SITRANS MS200