Advertisement
BSAP 6120 QSG
♦ Air: 8KV
f
CAUTION!
Electrostatic Discharge (ESD) can damage electronic devices. When handling devices, wear an antistatic discharge wrist strap to prevent
damage to electronic components. Place in antistatic packing material when transporting or storing. When installing or maintaining, always
place devices on an approved antistatic mat that is electrically grounded.
f
CAUTION!
This product is intended for business deployment. Care should be taken to protect cables from damage or vandalism.
g
NOTE
Changes or modifications not expressly approved by Adtran will void the warranty.
Compliance
■ Changes or modifications not expressly approved by Adtran could void the user's authority to operate this equipment.
IEEE 802.3at PoE+
■
■ FCC
♦ Subpart 15 B
♦ Subpart C 15.247
♦ Subpart E 15.407
■ CAN ICES-003(B) / NMB-003(B)
■ RSS-247
■ NRTL Safety Listed
FCC Statements
■ This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
■
1. This device may not cause harmful interference.
■
2. This device must accept any interference received, including interference that may cause undesired operation.
■ This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 25 cm between the radiator and your body.
■ This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
■ Changes or modifications not expressly approved by ADTRAN could void the user's authority to operate the equipment.
g
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and the receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
Documentation for Adtran Network Solutions products is
available for viewing and download directly from the
Adtran Support Community website.
Go to:
https://supportcommunity.adtran.com
Adtran offers training courses on our products, including
customized training and courses taught at our facilities
or at customer sites.
For inquiries, go to:
http://adtran.com/training
Warranty: Adtran will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can
www.adtran.com/warranty-terms
be found online at
Trademarks: Brand names and product names included in this document are trademarks,
registered trademarks, or trade names of their respective holders.
Copyright © 2023 Adtran, Inc. All Rights Reserved.
Access additional safety information and updated product documentation using
the QR code, or find additional resources from the Adtran Support Community
website.
https://supportcommunity.adtran.com
.
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY
HANDLING PRECAUTIONS REQUIRED
Product Specifications
Adtran CUSTOMER CARE:
From within the U.S.
1.888.423.8726
From outside the U.S. +1 256.963.8716
PRICING AND AVAILABILITY 1.800.827.0807
*61700973F1-13B*
Advertisement
