Advertisement
Installing the BSAP 6120
5. Wrap the hose straps around the vertical mounting pole and insert the end into the strap lock. Tighten the strap locks to secure the unit to the pole
)
(as shown in
Figure 4
.
6. Once the BSAP 6120 is securely installed, attach the grounding cable to a reliable earth ground point and proceed to the instructions provided in
"Supplying Power to the BSAP 6120"
Mounting the BSAP 6120 to a Horizontal Pole
1. Attach all antennas to the BSAP (refer to
2. Attach the grounding cable and screw to the BSAP (refer to
3. Thread the open end of the hose straps through the two tabs on the right and left of the mounting bracket so that the BSAP is aligned horizontally
(as shown in
Figure
5).
4. Attach the chassis to the pole mounting bracket by sliding the keyed slots on the back of the chassis securely onto the bracket's protruding
mounting tabs
(Figure
5). Be sure to secure the BSAP 6120 to the bracket by tightening the locking screw illustrated in the image below.
Figure 5. Insert Hose Straps for Horizontal Mounting and Securing BSAP to Mounting Bracket
g
NOTE
The BSAP must be mounted on the bracket so that the locking tab on the bracket aligns with the threaded hole for locking screw on
the unit.
5. Wrap the hose straps around the horizontal mounting pole and insert the end into the strap lock. Tighten the lock of the hose straps to secure the
unit to the pole (as shown in
6. Once the BSAP 6120 is securely installed, attach the grounding cable to a reliable earth ground point and proceed to the instructions provided in
"Supplying Power to the BSAP
4
Vertical Pole Mount
Figure 4. Vertical Pole Mount
on page 5
.
on page 2
"Antennas"
"Grounding the BSAP"
Locking screw to prevent
the BSAP from being
accidentally dislodged.
Hose Strap Insertion
Figure
6).
Figure 6. Horizontal Pole Mount
6120".
).
on page 2
).
Horizontal Pole Mount
BSAP 6120 QSG
Pole Mount
Bracket
61700973F1-13B
Advertisement
