Advertisement
Managing the BSAP 6120
Managing the BSAP 6120
You can connect to and manage the BSAP 6120 using one of Adtran's cloud management services or by using the BSAP's command line interface (CLI).
Each service offering and management method is described in the following sections.
Managing the BSAP 6120 with Express Cloud
Express Cloud is now included with the purchase of new Adtran Bluesocket 6120 series APs. Express Cloud can be used with the BSAP 6120, however
Elite Cloud or Elite On-Premises can be purchased for access to upgraded features.
For initial setup of Express Cloud:
https://adtran.com/cloud
1. Go to
will be sent via email within one business day.
2. After receiving e-mail confirmation, connect the BSAP to a power supply.
3. Connect the BSAP to an internet-accessed network. The BSAP will automatically discover Express Cloud and will display in the account.
For existing Express Cloud accounts adding additional BSAPs:
https://adtran.com/cloud
1. Go to
2. Using the same email address as the existing Express Cloud account in the email field and the domain name in the company field.
3. If using an email address that already has an account and a domain that already exists, you will be adding additional BSAPs to that existing
account and domain.
4. Confirmation that BSAPs have been added will be sent via email within one business day.
5. After receiving e-mail confirmation, connect the BSAP to a power supply.
6. Connect the BSAP to an internet-accessed network. The BSAP will automatically discover Express Cloud and will display in the account.
Express Cloud support is available in the Adtran interactive support community online at
g
NOTE
For further details regarding Express Cloud, Elite Cloud, and Elite On-Premises, refer to the FAQ in the support community. For further
information on creating an Express Cloud account, refer to the
Managing the BSAP 6120 with Elite Cloud
Purchasing an Elite Cloud subscription automatically creates a user cloud account. All further communication regarding the subscription will be provided
via email.
For initial setup of Elite Cloud:
1. Elite Cloud access information and credentials will be sent via email within one business day.
2. After receiving e-mail confirmation, connect the BSAP to a power supply.
3. Connect the BSAP to an internet-accessed network. The BSAP will automatically discover Elite Cloud and will display in the account.
For existing Elite Cloud accounts purchasing additional BSAPs and Elite Cloud Subscriptions:
1. Confirmation that the BSAPs have been added will be sent via email within one business day.
2. After receiving e-mail confirmation, connect the BSAP to a power supply.
6
INDOORS
NetVanta PoE
PoE Switch
Protector/Injector
(1702595F15)
OR
NetVanta PoE
Protector/Injector
Non-PoE Switch
(1702595F15)
with Optional AC Power
Adapter (1700501F1)
Ethernet Cable
Outdoor Shielded Ethernet Cable
Mesh Link
Ground Cable
Drip Loop
ADTRAN recommends forming a 3 to 5-inch drip loop
on outdoor cables where water could run along the
cable and enter the BSAP 6120, PoE injector, or
building. If the cables are oriented so that water
cannot possibly enter, drip loops are not necessary.
Figure 8. Powering the BSAP 6120 Indoors and Outdoors
and provide the requested information to create a new account. Express Cloud access information and credentials
.
OUTDOORS
To Earth Ground
PowerDsine PD-9001GO
Outdoor 802.3at PoE Injector
or Equivalent with
GR-1089-Core OR ITU-T K
Series Surge Protection
To Earth Ground
https://supportcommunity.adtran.com
Creating an Express Cloud Account
BSAP 6120 QSG
BSAP 6120
with Built-in
Ethernet and
Antenna Surge
Protection
BSAP 6120
with Built-in
Ethernet and
Antenna Surge
Protection
.
article in the support community.
61700973F1-13B
Advertisement
