Replacement Procedure
This section covers the disassembling and assembling procedure of the center conductor
assembly. See Table 4-3 for the reference designators.
Disassembling Procedure
1. Remove the center conductor assembly
2. Clamp the contact of the APC-7
3. Loosen the contact
Assembling Procedure
1. Put thread sealant
2. Assemble the parts
3. Set the angle of the contact assembly
1. Contact to a Agilent Technologies oece for the part number of the thread sealant.
R
using pliers which have rubber-covered noses.
A
.
D
1
to the screw part of the contact of the APC-7
,
,
, and
.
A
B
C
D
7
Figure 4-4. View Around the Electrode
from the test stage
7
as shown in Figure 4-4.
.
5
R
.
A
Service
4-5