Omron V460-H User Manual page 180

Image Scale represents the amount of data compression applied to the stored image. Images with a
lower compression ratio require more storage space. Options are:
1:1 – No data compression applied to image (default).
•
4:1 – Image compressed by 75%.
•
8:1 – Image compressed by 88%.
•
File Save Options allow the user to decide which type of report to save. Options are:
Image: Saves images (default).
•
Read Cycle Report: Saves cycle reports.
•
Image and Read Cycle Report: Saves images and cycle reports.
•
Image Storage Location is where images and reports are to be stored. Options are:
RAM (Volatile Memory): Images and read cycle reports are saved to internal RAM drive
•
(default).
Remote (FTP): Images and cycle reports are saved to a remote FTP-connected device.
•
When the Image Storage Location setting is configured as RAM, all information is saved to a RAM drive
onboard the camera. This drive is volatile and all data is lost when the unit resets. The location of the
drive is /imagesd0/Images.
The RAM Drive Size parameter allows the user to create a RAM drive between 1 MB and 50 MB. Default
is 20 MB. Resizing the RAM drive requires a reboot of the camera, resulting in loss of any data currently
on the drive. If the RAM Drive Size parameter changes, the message shown below will appear in the
Image Storage Location dialog. If you click Revert, the RAM drive size returns to its previous size.
The Save Image Until field determines for how long stored data is to be saved. Options are:
V460-H Industrial Handheld DPM Reader User Manual
4 WebLink Configuration
HH
4-97