Advertisement
Both dioptric correction and focusing have been
completed for your particular visual acuity. Please
note down your personal dioptric setting – this
can be read at the edge of the dioptric correction
wheel.
Tripod connection
(not available with SLC 8x30 WB)
Unscrew the covering of the tripod connection
thread by turning it to the left (anti-clockwise).
To mount the binocular onto the tripod, you
require the tripod connection which is available
as an accessory. Regarding the SLC 15x56 WB,
the connection pin is already mounted on the
instrument.
Maintenance and Care
Lens-cleaning cloth
You can clean high sensitive lens surfaces with
the enclosed special cloth made of micro-fibres.
It is suitable for objective lens, ocular lens and
eye-glasses.
Please keep the cloth clean, as dirt can damage
the lens surface. If the cloth gets dirty, it can be
washed in luke-warm soapy water and air-dried.
Please use it exclusively for cleaning lens sur-
faces!
Cleaning
We have designed all elements and surfaces to
require little care. To ensure the long-lasting opti-
cal brilliance of your binocular, you should keep
DE
EN
16
the glass surfaces free of
dirt, oil and grease. When
cleaning the lenses, first
remove larger particles with
an optical lens brush. For
the subsequent thorough
cleaning we recommend breathing onto the lens
surface to form a coat of condensation and then
cleaning it with a soft, moist cloth.
The housing is best clean-
sed with a soft, moist cloth
(don't use the lens-cleaning
cloth).
In the event of hard-to
remove dirt (e.g. sand), the
eye-cup can be unscrewed.
The ocular can then be
cleaned easily.
Storage
You should keep your binocular in its bag in a well-
ventilated, dry place.
If the instrument is wet,
it must be dried prior to
storage.
In tropical regions or regi-
ons with a high degree of
humidity the best place to
store the instrument in is an air-tight receptacle
along with a moisture-absorbing agent (e.g. silica
gel).
All data are typical values.
We reserve the right to make changes
regarding design and delivery.
EN
DE
BA-643/3, 05/2008
17
Advertisement
