Connecting And Setting Up The Gxv3370; Using The Phone Stand - Grandstream Networks GXV3370 User Manual

Ite
Name
m
1 HDMI Port
2 SD Card Port
3.5mm Headset
3
Port
4 USB Port

Connecting and Setting Up the GXV3370

The GXV3370 can be installed on the desktop using the built-in stand or attached on the wall using the slots for wall
mounting.

Using the Phone Stand

The GXV3370 has a built-in phone stand. To set up the GXV3370 as your desk phone, follow the steps below:
1. Take the phone stand out on the back and adjust the angle to place the phone steady on the desk;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the
Ethernet cable;
4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE
switch is used in step 3, this step could be skipped;
The LCD will display the booting up screen or firmware upgrading information. Before con tinuing, please wait for the main
screen display to show up.
Figure 4: GXV3370 Side View
Description
Connect display device to the HDMI port via HDMI cable.
Connect SD storage device to the SD Card Slot.
Connect 3.5mm headset.
USB devices can be connected via the USB port. For example, connect a USB flash drive to save
captured pictures.
Table 6: GXV3370 Side View