Advertisement
Bellfi res
MODES OF OPERATION
AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2
AM
Instructions for use
Thermostatic Mode
The room temperature is measured and compared
to the set temperature. The fl ame height is then
automatically adjusted to achieve the set
temperature.
Program Mode
PROGRAMS 1 and 2, each can be programmed to
go on and off at specifi c times at a set temperature.
Eco Mode
Flame height modulates between high and low.
If the room temperature is lower than the set
temperature, the fl ame height stays on high for a
longer period of time. If the room temperature is
higher than the set temperature, the fl ame height
stays on low for a longer period of time. One cycle
lasts approx. 20 min.
English
23
Advertisement
