Bellfires UNICA-2 90 Instructions For Use & Manual Daily Maintenance page 19

Hide thumbs Also See for UNICA-2 90:

Bellﬁ res

SETTING THE FLAME HEIGHT / EXTINGUISHING THE FIRE (STAND-BY)

OFF

1 2

OFF

1 2

Instructions for use

Gradually decrease ﬂ ame height / Extinguishing

the ﬁ re

• After ignition, the burner automatically sets the

ﬂ ames to the maximum height.

• Press

button to lower the ﬂ ames and to turn

off the burner. (Extinguishing the ﬁ re: Press

button and hold: pilot light remains burning

(standby position)!)

(Pressing brieﬂ y the

the ﬂ ames to the low position.)

Flame height directly to minimum position

• Pressing the

lowers the ﬂ ames to the low position. (When this

happens, the ﬂ ames will ﬁ rst automatically go

to maximum!) This is indicated by "

display.

Note: Backlight must be on for high ﬁ re and

low ﬁ re double-click operation!

Gradually increase ﬂ ame height

• Press

button and hold to increase the ﬂ ame

level and to turn on the burner from the stand-by

position.

(Pressing brieﬂ y the

increases the ﬂ ames to the high position.)

button gradually lowers

button twice, automatically

button gradually

English

" on the

Table of Contents