Table of Contents
Advertisement
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The iFit mode supports unsecured and
secured (WEP, WPA, and WPA2) encryption. A
broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after following
these instructions, go to support.iFit.com for
assistance.
5. Exit the wireless network mode.
To exit the wireless network mode, touch the back
button on the screen.
HOW TO USE A TABLET WITH THE CONSOLE
Note: To connect your tablet to the console, you must
have access to a wireless network (see page 27). An
iFit account and an iFit app are also required. Go to
the App Store or the Google Play store to download
the free iFit app and sign up for an iFit account.
1. Set up a wireless connection on the console.
See page 27. Note: The console and your tablet
must be connected to the same wireless network.
2. Access the iFit app on your tablet and sign
into your iFit account.
3. Set up a wireless connection to your tablet.
Connect your tablet to the same wireless network
you selected in step 1. Touch Connect on your
tablet. Then, press the Stop button on the console
to conÀ rm that you will be using your tablet to con-
trol the incline trainer.
4. Control the incline trainer using your tablet.
Once you have established a wireless connec-
tion between your tablet and the console, you can
control the incline trainer using the options on your
tablet. From your tablet, you can access workouts
and adjust the speed and incline. Note: A pop-up
window will cover the console's touch screen,
but the buttons on the console will continue to
function in addition to the tablet controls.
5. Log out and exit the iFit app.
When you are À nished using your tablet, touch the
link in the upper-right corner of your tablet to log
out.
HOW TO USE THE TABLET HOLDER
IMPORTANT: The tablet holder is designed for use
with most full-size tablets. Do not place any other
electronic device or object in the tablet holder.
To insert a tablet into the tablet holder, set the bottom
edge of the tablet in the tray. Then, pull the clip over
the top edge of the tablet. Make sure that the tablet
is firmly secured in the tablet holder. Reverse these
actions to remove the tablet from the tablet holder.
Tablet
Holder
28
Advertisement
Table of Contents
