Candy Grand GO4 107 2D User Instructions page 51

The option buttons should be selected before pressing the "START/PAUSE" button.
D
"Crease guard" button
The Crease Guard function (Not available on COTTON program) minimizes creases as
much as possible with a uniquely designed anti-crease system that is tailored to specific
fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in
water until it is time to unload. When you are ready to unload, press the "Crease Guard"
button – this will drain.
WOLLENS/HAND WASH – after the final rinse the fabrics are left in water until it is time to
unload and the button indicator blinking.
When you are ready to unload, press the "Crease Guard" button, this will drain and spin
ready for emptying.
If you do not want to spin the clothes and activate drain only:
- Turn the program selector to the "OFF" position;
- Select program drain only " ";
- Switch on the appliance again by pressing the "START/PAUSE" button.
E
"Wash Temperature" button
When a program is selected the relevant indicator will light up to show the recommended
wash temperature.
The Temperature button can be used to decrease or increase the temperature of your cho-
sen wash cycle. Each time the button is pressed, the new temperature level is shown on
the Wash Temperature Indicator.
51