Table of Contents
Advertisement
S
UPER X5DL8-GG/X5DLR-8G2+/X5DLR-8G2 User's Manual
GLAN1 Enable/Disable
(X5DL8-GG)
Change the setting of jumper JP54
to enable or disable the onboard
LAN1 port on the motherboard.
See the table on the right for
jumper settings.
ting is pins 1-2.
GLAN2 Enable/Disable
(X5DL8-GG)
Change the setting of jumper JP4
to enable or disable the onboard
LAN2 port on the motherboard.
See the table on the right for
jumper settings.
ting is pins 1-2.
SCSI Enable/Disable
The SCSI Enable/Disable jumper at
JA4 allows you to enable or dis-
able the onboard SCSI. The nor-
mal (default) position is on pins 1-
2 to enable SCSI. See the table on
the right for jumper settings.
SCSI Termination Enable/
Disable
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
the SCSI connectors. Jumper JPA1
controls SCSI channel A and JPA2
is for SCSI channel B. The default
setting is open to enable (teminate)
both SCSI channels. See the table
on the right for jumper settings.
The default set-
The default set-
2-18
LAN1
Enable/Disable
Jumper Settings
(JP54)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
LAN2
Enable/Disable
Jumper Settings
(JP4)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
SCSI Enable/Disable
Jumper Settings
(JA4)
Jumper
Position
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
SCSI Channel T ermination
Enable/Disable
Jumper Settings
(JPA1, JPA2)
Jumper
Position
Definition
Open
Enabled
Closed
Disabled
Advertisement
Table of Contents
