Supermicro X5DL8-GG User Manual page 13

X5DL8-GG Quick Reference
Jumper Description
J29 33 MHz PCI Enable/Disable
J35 Spread Spectrum
JA4 SCSI Enable/Disable
JBT1 CMOS Clear
JP2 PCI 3.3V Standby En/Dis
JP3 Watch Dog
JP4 GLAN2 Enable/Disable
JP7 Main Power Override
JP12 System Bus Speed
JP48 Chassis/Overheat Fan Select
JP54 GLAN1 Enable/Disable
JP56 VGA Enable/Disable
JP58 Fan Detection Select
JPA1/A2 SCSI Channel A/B Termination Open (Terminated)
P1/2, S1/2 PCI-X Speed Settings
Connector
ATX POWER
BANK1A-BANK4B
COM1/COM2
CPU1/CPU2
CPU/CHS/OH FAN
D1-D8
GLAN1/GLAN2
J1
J11
J12
J18, J19
J20/J21
J56
J65
J219
JA1/JA2
JF1
JF2
JP46
JP57
USB0/1
VGA
WOL
Description
Primary ATX Power Connector
Memory (RAM) Slots
COM1/COM2 Serial Port Connector/Header
CPU 1 and CPU2 Sockets
CPU/Chassis/Overheat Fan Headers
Debug LEDs
Ethernet Ports
USB2/3 Headers
PS/2 Keyboard/Mouse Ports
Floppy Disk Drive Connector
IDE #1/#2 Hard Disk Drive Connectors
IPMB/SMB Headers
Processor Power Connector
Parallel Printer Port
IPMI Slot (for IPMI daughter card)
Ultra320 LVD SCSI CH A/B Connector
Front Control Panel Connector
Speaker/HD LED Connectors
Third Power Supply Fail Header
Chassis Intrusion Header
Universal Serial Bus Ports
VGA Display (Monitor) Port
Wake-on-LAN Header
1-7
Chapter 1: Introduction
Default Setting
Open (Disabled)
Open (Disabled)
Pins 1-2 (Enabled)
See Chapter 2
Pins 1-2 (Disabled)
Pins 2-3 (NMI)
Pins 1-2 (Enabled)
Open (Normal)
Pins 1-2 (Auto)
Open (Overheat)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Open (CPU Fan)
See Section 2-8