Table of Contents
Advertisement
S
UPER X5DL8-GG/X5DLR-8G2+/X5DLR-8G2 User's Manual
2-8
Jumper Settings
Explanation of
Jumpers
To modify the operation of the
motherboard, jumpers can be
used
to
optional settings.
create shorts between two pins
to change the function of the
connector. Pin 1 is identified
with a square solder pad on
the printed circuit board. See
the motherboard layout pages
for jumper locations.
No te : On two pin jumpers,
"Closed" means the jumper is
on and "Open" means the
jumper is off the pins.
CMOS Clear
JBT1 is used to clear CMOS (which will also clear any passwords). Instead of
pins, this jumper consists of contact pads to prevent accidentally clearing the
contents of CMOS.
To clear CMOS, first power down the system, then
1) Unplug the power cord(s)
2) With the power disconnected, short the CMOS pads with a metal object such
as a small screwdriver
3) Remove the screwdriver (or shorting device)
4) Reconnect the power cord(s) and power on the system.
Note: Do not use the PW_ON connector to clear CMOS.
SpeakerEnable/Disable
(X5DL8-GG)
To enable use of the onboard
speaker, put a jumper on pins 13
and 15 of JF2.
jumper will disable the onboard
speaker.
choose
between
Jumpers
Removing the
Connector
Pins
Jumper
Cap
Setting
2-16
3
2
1
3
2
1
Pin 1-2 short
Advertisement
Table of Contents
