According to the brightness of the environment, the program shift may not be
used.
Set the shooting mode to another one than "P" or turn off the power to cancel
the setting you made.
When the brightness changes, the aperture (F-value) and shutter speed also
change while maintaining the shift amount.
[34] How to Use
Sweep Panorama
Allows you to create a single panoramic image from multiple images shot while
panning the camera.
1. Set the mode dial to
2. Point the camera at the subject.
3. While pressing the shutter button halfway down, aim the camera at one end
of the desired panoramic composition.
(A) This part will not be shot.
4. Press the shutter button fully down.
Shooting
Selecting a shooting mode
(Sweep Panorama).