Demo Mode - Sony a7s II How To Use Manual

When cleaning the image sensor with a blower, do not blow too hard. If you blow the
sensor too hard, the inside of the product may be damaged.
If the dust remains even after you cleaned the product as described, consult the service
facility.
[212] How to Use

Demo Mode

The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time. Normally select
[Off].
1. MENU →
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for
about one minute. Only protected AVCHD movies are played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded
date and time.
Off:
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC Adaptor (supplied).
Even if [On] is selected, the product does not start a demonstration if there is no movie file
on the memory card.
When [On] is selected, the product does not switch to power save mode.
[213] How to Use
TC/UB Settings
The time code (TC) and the user bit (UB) information can be recorded as data attached to
movies.
1. MENU →
Changing settings
(Setup) → [Demo Mode] → desired setting.
Changing settings
(Setup) → [TC/UB Settings] → setting value you want to change.
Setup menu
Setup menu