Table of Contents
Advertisement
Third Power Supply Alarm
Enable/Disable
The system will notify you in the
event of a power supply failure.
This feature assumes that three
power supply units are installed in
the chassis, with one acting as a
backup.
If you only have one or
two power supply units installed,
you should disable this with JP9 to
prevent false alarms.
table on the right for jumper set-
tings.
5-10 Onboard Indicators
GLAN1/GLAN2 LEDs
Each of the Ethernet ports (located
beside the VGA port) have two
LEDs.
The yellow LED indicates
activity while the other LED may be
green, orange or off to indicate
the speed of the connection. See
the table on the right for the func-
tions associated with this second
LED.
Chapter 5: Advanced Serverboard Setup
See the
5-21
T hird Power Supply
Alarm Enable/Disable
Jumper Settings (JP9)
Jumper
Position
Definition
Open
Disabled
Closed
Enabled
1 Gb LAN Right LED
Indicator
LED
Color
Definition
Off
No Connection
Green
100 MHz
Orange
1 GHz
Advertisement
Table of Contents
