Tank Installation - Holland Grill Tradition LS-2 Instruction Manual

Tank Installation

❍ Place your full 20-lb. propane tank into the hole ofthe grill base. Install the Tank Hold -Down Bracket
using the wing nut and adjust to secure the tank.Youmay need to rotate the tank to find a suitable
areafor the Hold Down Bracket to engage.
Screw the QCC-1 regulator onto the propane tankvalve by hand. The large plastic nut fits over the
❍
outside of the tank valve threads and turns right, orclockwise, to tighten. No tools are needed.
If a good connection is not achieved, the safetyvalve inside the QCC-1 regulator will not permit theproper
❍
amount of gas to flow. The only way to knowit the proper amount of gas is getting to the burner isby
looking at the flame once the grill is lit. If theflame looks very small, simply unscrew the regulator, wait a
few minutes and re-attach. This willre-set the QCC-1 safety valve.
❍ Check all bolts and nuts for tightness and proceed to gas leak testing.
Drain
Valve &
Bucket
Tank
Retainer
QCC-1
regulator
T-4