Table of Contents
Advertisement
S
UPERSERVER 6015V-MR/6015V-MRLP User's Manual
HDD LED
The HDD (IDE Hard Disk Drive) LED
connection is located on pins 13 and
14 of JF1. Attach the IDE hard drive
LED cable to display disk activity.
Refer to the table on the right for pin
defi nitions.
NIC1 LED
The NIC1 (Network Interface Control-
ler) LED connection is located on pins
11 and 12 of JF1. Attach the NIC1
LED cable to display network activity.
Refer to the table on the right for pin
defi nitions.
NIC2 LED
The NIC2 (Network Interface Control-
ler) LED connection is located on pins
9 and 10 of JF1. Attach the NIC2
LED cable to display network activity.
Refer to the table on the right for pin
defi nitions.
Overheat/Fan Fail LED
Connect an LED to pins 7 and 8 of JF1
to provide advanced warning of chas-
sis overheating. Refer to the table on
the right for pin defi nitions.
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to the table on the right for pin defi ni-
tions. This only applies to redundant
power supplies and so does not apply
to the 6014H-T.
Pin Defi nitions (JF1)
Pin#
13
14
Pin Defi nitions (JF1)
Pin#
11
12
Pin Defi nitions (JF1)
Pin#
9
10
OH/Fan Fail LED
Pin Defi nitions (JF1)
Pin#
7
8
Power Fail LED
Pin Defi nitions (JF1)
Pin#
5
6
5-12
HDD LED
Defi nition
Vcc
HD Active
NIC1 LED
Defi nition
Vcc
Ground
NIC2 LED
Defi nition
Vcc
Ground
Defi nition
Vcc
HD Active
Defi nition
Vcc
Ground
Advertisement
Table of Contents
