S
S
UPER
ERVER 6015V-MR/6015V-MRLP User's Manual
2-4
Installing the System into a Rack
(Rack hardware optional)
This section provides information on installing the SuperServer 6015V-MR/6015V-
MRLP into a rack unit. If the system has already been mounted into a rack, you
can skip ahead to Sections 2-5 and 2-6.
Basic Installation Procedure
The 6015V-MR/6015V-MRLP server comes with two rack mounting brackets, which
are located on each side at the front of the chassis. To mount the system into a
rack, simply screw these brackets directly to the front of the rack (two screws for
each bracket). As Figure 2-1 shows, the brackets can be located at the front of
the chassis (left fi gure) or moved approximately one-third to the rear of the chassis
(right fi gure).
Figure 2-1. Identifying the Sections of the Rack Rails
2-4