Download Print this page

Troubleshooting; Warranty - Galvin Engineering Assist 41978CP Installation Manuallines

Hand shower with inverted centre t 700x1100 ss hygienic grab rail

Advertisement

Product Installation Guidelines

TROUBLESHOOTING

PROBLEM
Water is not flowing or has
inconsistent flow
Leak from elbow

WARRANTY

The warranty set forth herein is given expressly and is the only warranty given by the Galvin
Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties,
express or implied. Galvin Engineering Pty. Ltd. hereby specifically disclaims all other warranties,
express or implied, including but not limited to the implied warranties of merchantability and fitness for a
particular purpose.
Galvin Engineering Pty Ltd products are covered under our manufacturer's warranty available for
download from www.galvinengineering.com.au Galvin Engineering Pty Ltd expressly warrants that the
product is free from operational defects in workmanship and materials for the warranty period as shown
on the schedule in the manufacturer's warranty. During the warranty period, Galvin Engineering will
replace or repair any defective products manufactured by Galvin Engineering without charge, so long as
the terms of the Manufacturer's warranty are complied with.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive
remedy for breach of warranty, and Galvin Engineering Pty Ltd shall not be responsible for any
incidental, special or consequential damages, including without limitation, lost profits or the cost of
repairing or replacing other property which is damaged if this product does not work properly, other
costs resulting from labour charges, delays, vandalism, negligence, fouling caused by foreign material,
damage from adverse water conditions, chemical, electrical or any other circumstances over which
Galvin Engineering has no control. This warranty shall be invalidated by any abuse, misuse,
misapplication, improper installation or improper maintenance or alteration of the product.
CAUSE
Shower is blocked with debris.
Insufficient sealant
th
Version 1, 4
September 2023, Page 5 of 5
Version 1, 4 September 2023, Page 5 of 5
RECTIFICATION
Remove debris from shower.
Ensure thread tape has been used during
installation.

Advertisement

loading

This manual is also suitable for:

Assist 41978