Galvin Engineering GalvinSafe 190.42.11.12 Product Installation Manualline

Eye/face wash, wall mtd, hand activated, axion msr head & s/steel bowl

Download this manual

GalvinSafe

Activated, Axion

PRODUCT CODE:

Galvin Engineering: 190.42.11.12

HAWS: 7778B-A

PRE - INSTALLATION

LOCATION OF UNIT: The Model 190.42.11.12 (7778B-A) Eye/Face Wash should be

installed in close proximity to potential accident areas. It should be clearly identified, free

from obstructions and easy to access.

SUPPLY LINE: The minimum recommended line size is 1/2" BSPT with 210 – 600 kPa

flowing pressure. Where sediment or mineral content is a problem, an inlet filter is

recommended.

PLUMBING CONNECTIONS: Inlet supply is female 1/2" BSPT. Waste outlet is male 1-

1/4" BSPT.

INSTALLATION

Refer to installation drawing to clarify installation procedure.

Eye/Face Wash, Wall Mtd, Hand

MSR Head & S/Steel Bowl (HAWS)

Version 4.1, 13

Aug. 2021, Page 1 of 7

Table of Contents

Page 1 ® Activated, Axion MSR Head & S/Steel Bowl (HAWS) PRODUCT CODE: Galvin Engineering: 190.42.11.12 HAWS: 7778B-A PRE - INSTALLATION LOCATION OF UNIT: The Model 190.42.11.12 (7778B-A) Eye/Face Wash should be installed in close proximity to potential accident areas. It should be clearly identified, free from obstructions and easy to access.
Page 2: Parts Breakdown
190.91.12.32 190.92.41.30 GALVINSAFE SS316 EYEWASH VALVE PLUS PUSH FLAG (HAWS) DUST COVER ASSEMBLY* (OPTIONAL) 190.92.12.10 EYE/FACE WASH ASSEMBLY 190.91.80.33 TEST TAG L-STRAINER* * spare part will require special order or may not be available (contact Galvin engineering for more details).
Page 3 Version 4.1, 13 Aug. 2021, Page 3 of 7...
Page 4: Troubleshooting
Version 4.1, 13 Aug. 2021, Page 4 of 7 TROUBLESHOOTING PROBLEM REPAIR CHECKLIST 1. No Flow. 1. Check the main shut-off valve. 2. Insufficient water flow 2. a. Verify minimum 210 kPa flowing supply line pressure b. Probable clogging of flow control due to inadequate line flushing.
Page 5 Version 4.1, 13 Aug. 2021, Page 5 of 7...
Page 6 Version 4.1, 13 Aug. 2021, Page 6 of 7...
Page 7: Warranty
Aug. 2021, Page 7 of 7 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.

Haws 7778b-a