Advertisement
Quick Links
®
GalvinSafe
®
Axion
MSR Head, S/S Bowl w/ Body Spray (HAWS)
PRODUCT CODE:
Galvin Engineering: 190.42.11.90
HAWS: 7778B-A
PRE – INSTALLATION: 7778B-A
LOCATION OF UNIT: The Model 7778B-A Eye/Face Wash should be installed in close
proximity to potential accident areas. It should be clearly identified, free from obstructions
and easy to access.
SUPPLY LINE: The minimum recommended line size is 1/2" BSPT with 210 – 600 kPa
flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended.
PLUMBING CONNECTIONS: Inlet supply is female 1/2" BSPT. Waste outlet is male 1-
1/4" BSPT.
PRE – INSTALLATION: 8901B
LOCATION OF UNIT: The Model 190.43.55.32 (8901B) Hose Spray should be installed
in close proximity to potential accident areas. It should be clearly identified, free from
obstructions and easy to access.
SUPPLY LINE: The minimum recommended line size is 1/2" BSPT with 210 – 600 kPa
flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended. A vacuum breaker is required to be used with this item. (Not supplied with
the product or by Galvin Engineering)
PLUMBING CONNECTIONS: Inlet supply is male 1/2" BSPT.
Eye/Face Wash, Wall Mtd, Hand Act,
Version 4.1, 12
HAWS: 8901B
t3
Aug. 021, Page 1 of 9
Advertisement
Related Manuals for Galvin Engineering GalvinSafe 190.42.11.90
Summary of Contents for Galvin Engineering GalvinSafe 190.42.11.90
- Page 1 Where sediment or mineral content is a problem, an inlet filter is recommended. A vacuum breaker is required to be used with this item. (Not supplied with the product or by Galvin Engineering) PLUMBING CONNECTIONS: Inlet supply is male 1/2” BSPT.
-
Page 2: Item Description
190.91.12.32 190.92.41.30 GALVINSAFE SS316 EYEWASH VALVE PLUS PUSH FLAG (HAWS) DUST COVER ASSEMBLY* (OPTIONAL) 190.92.12.10 EYE/FACE WASH ASSEMBLY 190.91.80.33 TEST TAG L-STRAINER* * spare parts will require special order or may not be available (contact Galvin engineering for more details). - Page 3 Version 4.1, 13 Aug. 2021, Page 3 of 9...
- Page 4 ITEM DESCRIPTION EYE/FACE WASH HEAD* FLOW CONTROL* 190.92.50.00 VALVE ASSEMBLY HOSE ASSEMBLY* HOSE SPRAY SIGN* 190.91.80.33 TEST TAG VRKSP248 VALVE REPAIR KIT* * spare part will require special order or may not be available (contact Galvin engineering for more details).
- Page 5 Version 4.1, 13 Aug. 2021, Page 5 of 9...
-
Page 6: Repair Checklist
Version 4.1, 13 Aug. 2021, Page 6 of 9 TROUBLESHOOTING: 7778-A PROBLEM REPAIR CHECKLIST 1. No Flow. 1. Check the main shut-off valve. 2. Insufficient water flow 2. a. Verify minimum 210 kPa flowing supply line pressure b. Probable clogging of flow control due to inadequate line flushing. - Page 7 Version 4.1, 13 Aug. 2021, Page 7 of 9...
- Page 8 Version 4.1, 13 Aug. 2021, Page 8 of 9...
-
Page 9: Warranty
Aug. 2021, Page 9 of 9 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.