Galvin Engineering GalvinSafe 190.82.11.12 Product Installation Manualline

Pedestal floor mtd, axion msr eye/face wash head, s/steel bowl, hand act

Download this manual

GalvinSafe

Wash Head, S/Steel Bowl, Hand Act, (HAWS)

PRODUCT CODE:

Galvin Engineering: 190.82.11.12

HAWS: 7777-A

PRE - INSTALLATION

LOCATION OF UNIT: The Model 190.82.11.12 (7777-A) Stainless Steel combination

Shower Eye/Face Wash should be installed in close proximity to potential accident

areas. It should be clearly identified, free from obstructions and easy to access.

SUPPLY LINE: The minimum recommended line size is 1/2" BSPT with 210 – 600 kPa

flowing pressure. Where sediment or mineral content is a problem, an inlet filter is

recommended.

PLUMBING CONNECTIONS: Inlet supply is female 1/2" BSPT. Waste outlet is male 1-

1/4" BSPT.

INSTALLATION

Refer to installation drawing to clarify installation procedure.

Pedestal Floor Mtd, Axion

Version 4.1, 13

Aug. 2021, Page 1 of 6

MSR Eye/Face

Table of Contents

Page 1 Pedestal Floor Mtd, Axion MSR Eye/Face Wash Head, S/Steel Bowl, Hand Act, (HAWS) PRODUCT CODE: Galvin Engineering: 190.82.11.12 HAWS: 7777-A PRE - INSTALLATION LOCATION OF UNIT: The Model 190.82.11.12 (7777-A) Stainless Steel combination Shower Eye/Face Wash should be installed in close proximity to potential accident areas.
Page 2: Parts Breakdown
190.91.12.32 SIGN 190.92.41.30 VALVE ASSEMBLY 190.91.22.12 FOOT TREADLE (OPTIONAL) 190.92.12.10 EYE/FACE WASH ASSEMBLY 190.91.80.33 TEST TAG L-STRAINER* SS DUST COVER ASSEMBLY* (OPTIONAL) * spare parts will require special order or may not be available (contact Galvin engineering for more details).
Page 3 Version 4.1, 13 Aug. 2021, Page 3 of 6...
Page 4: Troubleshooting
Version 4.1, 13 Aug. 2021, Page 4 of 6 TROUBLESHOOTING PROBLEM REPAIR CHECKLIST 1. No Flow. Check the main shut-off valve. 2. Insufficient water flow 2. a. Verify minimum 210 kPa flowing supply line pressure. b. Probable clogging of flow control due to inadequate line flushing.
Page 5 Version 4.1, 13 Aug. 2021, Page 5 of 6...
Page 6: Warranty
Aug. 2021, Page 6 of 6 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.

Haws 7777-a