Table of Contents
Advertisement
A+ Server 4022G-6F User's Manual
Memory Timing Parameters
This selects the which node's timing parameters to display. The only selection
for this option is CPU Node 0.
Clock Speed Information
Clock speed information for memory is displayed under this Northbridge
Chipset Confirguration page. This information includes Memory CLK, CAS
Latency (Tcl), RAS/CAS Delay (Trcd), Row Precharge Time (Trp), Min Active
RAS (Tras), RAS/RAS Delay (Trrd), Row Cycle (Trc), Read to Precharge
(Trtp), Write Recover Time (Twr) and Memory Type.
NorthBridge Configuration
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or
EHCI bus devices.
USB 2.0 Controller Mode
Use this setting to configure the USB 2.0 Controller in either Hi-Speed (480
Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed
Mode) or Disabled (Full Speed Mode).
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy
support if there are no USB devices installed in the system. "Auto" disabled
Legacy support if no USB devices are connected. The options are Disabled,
Enabled and Auto.
IDE Configuration
Onboard PCI IDE Controller
This setting allows you to Enable or Disable the PCI IDE controller.
OnChip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.
OnChip SATA Type
Use this setting to set the OnChip SATA type. Options include
Native IDE, RAID, AMD_AHCI and Legacy IDE.
7-6
Advertisement
Table of Contents
