Chapter 2: Installation Procedures; Section 1: Installing Components Into The Sc813 Chassis - Supero SC813 Series Installation Manual

Chapter 2: Installation Procedures

Section 1: Installing Components into the SC813
Chassis
A. Removing the top cover from the chassis
Before installing any components, replacing chassis fans or accessing the
motherboard, you will first need to remove the top cove from the chassis.
Procedures
1. Press the release tabs to release the top cover from its locking posi-
tion.
2. Slide the top cover out from the chassis as shown below:
Press the release buttons
3. You can now lift the side cover up and off the chassis.
Chapter 2: Installation Procedures
Slide the top cover out
from the chassis
2-1