Intelligent; Schedule; Detection - urmet domus I Series User Manual

10.8 INTELLIGENT

This section briefly describes the intelligent video analysis functions capable of generating specific events that can also be
recorded on a remote NVR.
For further details on the use and settings of the intelligent video analysis functions, you can visit the URMET website
http://www.urmet.com for series or product codes, the availability of relevant additional material and any firmware updates
describing improvements to the intelligent video analysis algorithms.
IMPORTANT NOTE:
1) The video content analysis algorithms described in this section are based on an automatic analysis of the scene
filmed by the camera device, which is capable of automatically processing the images. For this reason, the
algorithms may, in some conditions, generate false alarms or fail to detect certain events.
In this sense, therefore, they cannot be considered zero-error-rate analysis systems.
2) The efficiency of the video analysis algorithms strictly depends on the level of quality of the image filmed by the
camera.
3) After activation of any video analysis algorithm, you must wait for a period of 30-60 seconds for initialisation of the
function. During this period, the video analysis algorithm is not operational.
4) To enable recordings, set the programming in the Schedule menu and ensure that there is available free space in
the memory drive.
5) The letter S (in green) at the bottom centre of the image indicates an intelligent analysis event in progress without
video recording. If recording is enabled and the Schedule has been programmed, the letter S (in red) will appear
at the bottom centre of the image for all intelligent analysis events.
6) The following two groups of algorithms: PID / LCD / SOD and PD / FD / CC are mutually exclusive and cannot be
activated at the same time.
7) When the three algorithms PID / LCD / SOD are activated at the same time, the most recently configured scene
has validity.
8) The video analysis will not work if the camera is set to corridor mode.
9) The intelligent video analysis algorithms may or may not be available, and their number may vary, depending on
the model of the device that is connected (e.g.: IP/Fish Eye camera) or being used (e.g.: HVR/NVR).
10) Dates and times can be programmed for intelligent video analysis.
10.8.1

SCHEDULE

Select Schedule in the Intelligent menu to access the following event programming page:
10.8.2

DETECTION

The following intelligent video analysis algorithms are available for this range of 4M H.265 IP cameras: Perimeter Intrusion
Detection (PID), Line Crossing Detection (LCD), Stationary Object Detection, Pedestrian Detection （
CC .
FD and Cross Counting （
（ ）
DS1093-568C
All manuals and user guides at all-guidesbox.com
）
38
PD , Face Detection
）