13 SERVICE WORK ON THE CHASSIS
13.4
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.5
13.6
82
Taking the motorcycle off the front lifting gear
312029-10
Removing the seat
H02022-10
Mounting the seat
401677-10
Info
Always raise the motorcycle at the rear first.
–
Lift the motorcycle at the front.
Main work
–
Secure the motorcycle against falling over.
–
Remove the front lifting gear.
Finishing work
–
Install the front fender. (
–
Insert the ignition key in seat lock
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Remove the ignition key.
–
1
Hook holding lug
of the seat onto the fuel tank, lower the
rear and push it forward.
–
2
Insert locking pin
into the lock housing and push down the
rear of the seat until the locking pin engages with a click.
–
Check that the seat is correctly mounted.
p. 94)
1
and turn it clockwise.