16.6
Changing the ABS fuses
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
Two fuses for the ABS are located under the seat. These fuses protect the return pump and the hydraulic
unit of the ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
–
Mount protection cap
F02080-10
Finishing work
–
Mount the seat. (
–
Set time and date.
Preparatory work
–
Remove the seat. (
To change the fuse of the ABS hydraulic unit:
–
Remove the protection cap and fuse
Info
A faulty fuse has a burned-out fuse wire
–
Insert the spare fuse with the correct rating.
Fuse (75011088015) (
F02082-10
Tip
Insert spare fuse
available if needed.
–
Mount the protection cap.
To change the fuse of the ABS return pump:
–
Remove the protection cap and fuse
Info
A faulty fuse has a burned-out fuse wire
–
Insert the spare fuse with the correct rating.
Fuse (75011088025) (
F02082-11
ELECTRICAL SYSTEM 16
1
.
p. 82)
p. 82)
1
.
p. 149)
2
in the fuse box so that it is
3
.
p. 149)
A
.
A
.
125