Setting An Alert; Activity Map Settings; Routing Settings; Using Climbpro - Garmin D2 MACH 1 STANDARD Owner's Manual

Alert Name Alert Type
Heart Rate Range
Pace Range
Pacing Recurring
Power Range
Proximity Event
Run/Walk Recurring
Speed Range
Stroke Rate Range
Event,
Time
recurring
Track Timer Recurring

Setting an Alert

1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Alerts.
6 Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
7 If necessary, select the type of alert.
8 Select a zone, enter the minimum and maximum
values, or enter a custom value for the alert.
9 If necessary, turn on the alert.
For event and recurring alerts, a message appears each
time you reach the alert value. For range alerts, a message
appears each time you exceed or drop below the specified
range (minimum and maximum values).

Activity Map Settings

You can customize the appearance of the map data
screen for each activity.
26
Description
You can set minimum and
maximum heart rate values
or select zone changes. See
About Heart Rate Zones,
page 68 and Heart Rate
Zone Calculations, page 69.
You can set minimum and
maximum pace values.
You can set a target swim
pace.
You can set the high or low
power level.
You can set a radius from a
saved location.
You can set timed walking
breaks at regular intervals.
You can set minimum and
maximum speed values.
You can set high or low
strokes per minute.
You can set a time interval.
You can set a track time
interval in seconds.
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Map.
Configure Maps: Shows or hides data from installed map
products.
Map Theme: Sets the map to display data optimized
for your activity type. The System option uses the
preferences from the system map settings
Themes, page 62).
Use Sys. Settings: Enables the watch to use the
preferences from the map system settings
Settings, page 61). When this setting is disabled, you
can customize the map settings for the activity.
Restore Theme: Allows you to restore default map theme
settings or themes that have been deleted from the
watch.

Routing Settings

You can change the routing settings to customize the way
the watch calculates routes for each activity.
NOTE: Not all settings are available for all activity types.
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Routing.
Activity: Sets an activity for routing. The watch calculates
routes optimized for the type of activity you are doing.
Popularity Routing: Calculates routes based on the most
popular runs and rides from Garmin Connect.
Courses: Sets how you navigate courses using the watch.
Use the Follow Course option to navigate a course
exactly as it appears, without recalculating. Use the Use
Map option to navigate a course using routable maps,
and recalculate the route if you stray from the course.
Calculation Method: Sets the calculation method to
minimize the time, distance, or ascent in routes.
Avoidances: Sets the road or transportation types to avoid
in routes.
Type: Sets the behavior of the pointer that appears during
direct routing.

Using ClimbPro

The ClimbPro feature helps you manage your effort for the
upcoming climbs on a course. You can view climb details,
including gradient, distance, and elevation gain, before
or in real time while following a course. Cycling climb
categories, based on length and gradient, are indicated by
color.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select ClimbPro > Status > When Navigating.
(Map
(Map
Activities and Apps