Table of Contents
Advertisement
8060
Load
Display a Reference Waveform
1. Press M/R button to show the reference waveform menu.
2. Press F2 to select the reference channel: CH1, CH2 or MATH.
3. Press F4 to save REF.
4. Press F5 to load an internal REF file.
5. Press F1 button to turn on REF.
Note:
The Reference function is not available in X-Y mode.
Set Horizontal System
The horizontal system changes the horizontal scale and position of waveforms. The
horizontal center of the screen is the time reference for waveforms. Changing the
horizontal scale causes the waveform to expand or contract with respect to the screen
To load a chosen file
Go to the Storage menu page
Figure 2-19 Reference display
Advertisement
Table of Contents
