Hantek DSO8000 Series User Manual page 31

8060
The Math menu setting table
Menu
Enable
Operate
Source A
Source B
1/2
2/2
Volt/Div
Invert
Probe
2/2
Addition, Subtraction, Multiplication,Division and FFT
In the Math function, use the addition, subtraction, multiplication,division and FFT to
operate and analyze the waveform.
The multiplication function window is displayed in figure 2-13
Figure 2-12 The Math menu
Setting
ON Turn on math
OFF Turn off math
A + B Add source A and source B
A - B Subtract source B from source A
A X B Multiply source B by source A
A / B Divide source A by source B
FFT Fast Fourier Transform
CH1
Define CH1 or CH2 as source A
CH2
CH1
Define CH1 or CH2 as source B
CH2
Go to the next menu page
Back to the previous menu page
Coarse Set Voltage range coarsely
Fine Set Voltage range finely
ON Invert the MATH waveform
OFF Waveform display normal
1x
Select one according the probe attenuation
10x
factor to ensure a correct vertical scale
100x
reading
1000x
Back to the previous menu page
0
Description