EN
4.3.3
Turn-on check
Press the power button
and light up the display.
4.3.4
Set the system language
This product supports many languages, you can click
the system language.
4.3.5
Test terminal connection
1 + represents connecting the positive end of the thermocouple
2 - represents connecting the negative end of the thermocouple
Note:
1. The isolation voltage between channels should not exceed 300VDC, otherwise
the instrument may be damaged.
2. The red connector of the thermocouple line is the positive end.
Copyright Qingdao Hantek Electronics Co., LTD
Quick Start
in the lower left corner of the front panel to start the device
Figure 4.3 Test interface
> Language > Edit to set
HTM200 user manual
13