Hantek DSO8000 Series User Manual page 48

The Video Trigger menu (Page 2/2)
The Video Trigger menu table
Menu Setting
Channel
Normal
Polarity
Invert
All Field
Odd Field
Sync
Even Field
Line Num
All Lines
1/2
2/2
Line Num
PAL/SEC
Standard
NTSC
Figure 2-34 The Video Tirgger menu
CH1 Set trigger mode for CH1
CH2 Set trigger mode for CH2
Applicable to the video signal of which the black level is
low
Applicable to the video signal of which the black level is
high
Set trigger on the falling edge of the first serration pulse
to field
Set trigger on the falling edge of the first serration pulse
to odd field
Set trigger on the falling edge of the first serration pulse
to even field
Set trigger on the selected line in even field or odd field
Set trigger on the first line found
Go to the next menu page
Back to the previous menu page
Set the lines of trigger video
Set video standard to PAL/SEC
Set video standard to NTSC
DSO8000 SERIES
Description