Removing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
rear
4
Follow the procedure from step 1 to step 8 in
keyboard
assembly".
Procedure
1
Peel off the tape that secures the touch pad to the palm rest and keyboard
assembly.
2
Remove the four screws (M2x2) that secure the touch pad to the palm rest and
keyboard assembly.
70
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
"Removing the palm rest and
Before