Removing the palm rest and
keyboard assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Open the latches and disconnect the touch-pad cable and keyboard-backlight
cable from the system board.
2
Remove the 16 screws (M2.5x5) that secure the palm rest and keyboard
assembly to the computer base.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
43