Table of Contents
Advertisement
Display
6.3
Display information
When no keys are operated or when no deviating situation has developed (such as fault message or filter
message) then the light will go out two minutes after the last key has been operated.
When there is a filter message or a fault in the appliance, then the light of the display will be on
permanently until the fault has been solved or the filter message has been reset.
Pressing the Home button
return button
Briefly press the display (shorter than 5 seconds) to switch on the display backlight without changing
anything in the menu; the display lights up for 2 minutes.
By pressing one of the quarter circles on the main screen, the ventilation mode can be quickly adjusted.
The ventilation mode that has be set in this way remains active for half an hour; this is visible on the
display by a hand with a clock.
The touchscreen can also be permanently set as multiple switch; to do this step number 15.6 in the
settings menu has to be set to "yes".
22 | WOLF GmbH
brings you back to the main screen from any particular menu; pressing the
takes you back 1 step in the menu.
Warning:
Incorrect settings can seriously disrupt the proper functioning of the appliance!
xxxx
7100832_202010
Advertisement
Table of Contents
