Audio Adjustment ("Audio" Menu); Speaker Setting; Audio Input; Audio Output Type Setting - Sharp XG-SV200X Operation Manual

Audio Adjustment ("Audio" Menu)

Picture Audio SIG
Speaker

Audio Input

Audio Out
Treble
Bass
SEL./ADJ.
RETURN

1 Speaker Setting

This function allows you to set the audio
output of the internal speaker to "On" or "Off"
such as when the projector is connected to an
external amplifi er.
Selectable
items
On The audio signal is output from the
internal speaker.
Off The audio signal is not output from the
internal speaker.
2 Audio Input
This function allows you to select an
appropriate combination of audio input
terminals for each input mode.
Selectable
items
Audio 1 The AUDIO 1 input terminal is used as
an audio input terminal
Audio 2 The AUDIO 2 input terminal is used as
an audio input terminal.
HDMI HDMI terminal is used as an audio
input terminal. (This item is available
with HDMI input.)
SCR PRJ Net.
On
Audio1
FAO
0
0
ENTER
END
Description
Description
Menu operation n Page

3 Audio Output Type Setting

This function determines whether the audio
level output from the AUDIO output terminal is
fi xed or variable by linking with VOLUME.
Selectable
items
FAO Audio output that does not vary in
(Fixed Audio strength with the volume level of
Output) the source projector.
VAO Audio output that varies in strength
(Variable Audio with the volume level of the source
Output) projector.
Info
• When "Audio Out" has been set to "VAO", fi rst
make sure to lower the volume of the projector
before turning the power on or off and when
switching the input.

4 Adjusting the Audio

This function allows you to adjust the
projector's audio.
Selectable
O button
items
Treble For weaker treble
Bass For weaker bass
46
Description
Q button
For stronger treble
For stronger bass
51