Reduction/Enlargement/Zoom - Sharp AL-2050CS Digital Multifunctional System Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is
being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can
be pressed to quickly select a ratio from among eight preset ratios. In addition, the
[ ] key ( ) and [
1%.
1
Place the original(s) and check the paper size.
2
Press the [COPY RATIO] key.
3
Press the [COPY RATIO] key and/or [
( ) to select the desired copy ratio and then press the
[ENTER] key.
Selecting a preset ratio
The preset ratios change as follows each time the
[COPY RATIO] key is pressed:
"100%" → "78%" → "64%" → "50%" → "25%" →
"400%" → "200%" → "129%"
Fine adjustment of the ratio
The ratio can be adjusted from 25% to 400% in
increments of 1%.
Use the [
fine adjustment.
• To return the ratio to 100%, press the [COPY RATIO] key until 100%
Note
appears.
• Press the [COPY RATIO] key to set the approximate ratio, then press
the [
• To decrease or increase the zoom ratio rapidly, hold down the [
key (
The ratio will stop changing at each of the preset ratios. To continue
changing the ratio, release the key and then hold it down again.
4
Select the number of copies and any other copy settings, and
then press the [START] key (
The copy will be delivered to the paper output tray.
] key ( ) can be pressed to select the ratio in increments of
] key ( ) or the [
] key ( ) or [
) or [ ] key (
] key (
] key ( ) for
] key ( ).
).
).
COPY RATIO
- 100% +
) or [ ] key
8.5x14 TO 8.5x11
- 78% +
ZOOM
- 99% +
]
3
29