Making Copies; Normal Copying - Sharp AL-2050CS Digital Multifunctional System Operation Manual

3
Chapter 3

MAKING COPIES

This chapter explains basic copying functions.

NORMAL COPYING

Using the document glass
Note
1
Open the RSPF, and place the original face down on the
document glass.
[How to place the original]
Align the original with the original scale and the
centering (
2
Gently close the RSPF.
By factory default, when a copy is made with
the RSPF cover open, the function for
preventing excessive toner use activates and
"CHECK ORIGINAL" appears in the display.
(See the "Check RSPF open function"
(p.25).)
3
Select the number of copies and any other copy settings, and
then press the [START] key (
Note
Copying books or originals with folds or creases
Press down on the RSPF while copying as shown. If
the RSPF is not completely closed, shadows may
appear on the copy or it may be fuzzy. Straighten
originals that have folds or creases before placing it
on the document glass.
24
• The document glass can scan up to 8-1/2" x 14" original.
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the "SPECIFICATIONS" (p.91).
) mark.
• To stop copying in the middle of a run, press the [CLEAR] key (
• For the copy settings, see pages 27 through 39.
Original scale
).
mark
).