Sharp AL-2050CS Digital Multifunctional System Operation Manual page 67

Program
Program name
number
19 AE LEVEL ADJUST
20 LANGUAGE
21 RESET FACTORY
SORT AUTO
22
SELECT
CHECK RSPF
24
OPEN
VALID COPY
25
WIDTH
28 LSU SETTING
29 PAPER TYPE
DISPLAY
30
CONTRAST
Setting codes
(factory default
setting appears
in bold)
• This is used to adjust the
1: SPF/RSPF
(Adjustment to • The automatic exposure level can
5 levels is
possible.)
2: DOCUMENT
• For the procedure for adjusting
GLASS
(Adjustment to
5 levels is
possible.)
1: AMERICAN
ENGLISH
• This is used to set the
2: ENGLISH
3: FRENCH
4: SPANISH
• This is used to return all settings
1: YES
2: NO
• Use this setting to enable or
1: ON
2: OFF
• You can set the operation that
1: ON
2: OFF
• Set the allowed paper sizes
1: 8.5x11
2: 5.5x8.5
• Select whether copying is only
1: ON
2: OFF
• Set the temperature of the
1: PLAIN PAPER
2: HEAVY PAPER
1: LIGHTER
2: LIGHT
• Set the contrast of the display.
3: NORMAL
4: DARK
5: DARKER
USER SETTINGS
Explanation
exposure level.
be adjusted separately for the
document glass and the RSPF.
the exposure and guidelines
for numeric values, see page
28. The factory default setting
for the exposure level is center.
language used in the display.
to the factory default settings.
disable sort auto select mode.
takes place if the [START] key
( ) is pressed when the
RSPF is not completely closed.
(For details on the "Check RSPF
open function", see page 25.)
for copying from the bypass
tray. When "5.5x8.5" is
selected, a copy of a letter
size original will only be
printed up to invoice size.
allowed when the polygon
motor is rotating, or also when
the polygon motor is stopped.
fusing unit when the bypass
tray is used.
7
65