Environmental Information - Sharp AL-2050CS Digital Multifunctional System Operation Manual

ENVIRONMENTAL INFORMATION

For users in the USA
Products that have earned the ENERGY STAR
protect the environment through superior energy efficiency.
Laser information
Wave length
Pulse times (North America)
Output power
At the production line, the output power of the scanner unit is adjusted to 0.18
MILLIWATT PLUS 5% and is maintained constant by the operation of the
Automatic Power Control (APC).
Caution
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)
This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and
1040.11 of the CDRH standards. This means that the equipment does not produce
hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The equipment's exterior covers contain several safety interlock switches. Do not
bypass any safety interlock by inserting wedges or other items into switch slots.
A small amount of ozone is produced within the unit during operation. The
emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1ppm
3
(0.2mg/m ) calculated as an 8 hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it
is advisable to place the unit in a ventilated area.
780 nm +15 nm
-10 nm
12.88 µs ±12.88 ns/7 mm
Max 0.2 mW
SAFETY PRECAUTIONS
®
are designed to
5