Respekta HS2200-26 Installation & User's Instructions page 99

WARNING: If in doubt concerning local regulations, consult the building code authorities.
WARNING: Use heat resistant and easy-to-clean materials (e.g. ceramic tiles) on the
walls next to the hob.
WARNING: Ensure the power cable is not routed through kitchen unit doors or drawers
WARNING: Ensure there is a constant flow of fresh air from the opening in the kitchen
unit to the base of the appliances.
WARNING: The appliance must be installed by qualified personnel or technicians. Do not
attempt to install the appliance on your own under any circumstances.
The manufacturer declines all liability in the case of improper installation that results in
harm to persons or animals or damage to property.
WARNING: The appliance (oven/hob) must not be installed directly over a dishwasher,
refrigerator, freezer, washing machine, or dryer, because the electronic components may
be damaged by humidity.
WARNING: The appliance (oven/hob) must be installed in such a way as to assure
effective heat removal to improve its reliability.
Ensure there is a constant flow of fresh air beneath the hob.
Ensure there is a constant flow of fresh air behind the oven.
WARNING: Do not use steam cleaning equipment.
WARNING: The glass ceramic hob must be connected to a power supply with general
impedance below 0.427 ohm. If necessary, contact the electricity company for information
on impedance.
Before fixing the hob mounting brackets
WARNING: Before fixing the hob mounting brackets the appliance must be placed on
a stable and smooth surface (use the appliance box). Do not lift the appliance or grip it
using the protruding controls.
Adjusting the hob bracket position
WARNING: After installation, secure the hob to the worktop, screwing the four brackets
into the underside of the hob.
en-40