Respekta HS2200-26 Installation & User's Instructions page 109

WARNING: Connection of the power cable must comply with the instructions given in the
table below.
Conductor cross section (mm²)
Connection mode
1N~ (single-phase)
2N~ (two-phase)
3N~ (three-phase)
Fit a suitable plug corresponding to the load shown on the appliance nameplate.
Connecting the hob to the oven
1) - Power cable
2) - Hob control knobs connecting cable
en-50
1)
L1 L2 L3
Min 6 - -
Min 2.5 Min 2.5 -
Min 2.5 Min 1.5 Min 1.5
N E
Min 6 Min 6
Min 6 Min 6
Min 6 Min 6
2)
Fig. 5.11