Oki ES8462 User Manual page 93

4. If required, enable receive protect:
(a) Press Rx Protect.
Press ON.
(b)
(c) Press Enter.
NOTE
When Rx Protect is set to ON, only polling transmission is available.
When Rx Protect is set to ON, Auto Print and OverWrite features are disabled.
5. If required, enable concurrent print:
Press Auto Print.
(a)
(b) Press ON.
Press Enter.
(c)
NOTE
When Auto Print is set to ON, a document received in the notice board is
printed.
6.
If required, enable overwrite permission:
(a) Press OverWrite.
(b) Press ON.
Press Enter.
(c)
NOTE
When OverWrite is set to ON, the previous-stored document is overwritten by
the received document.
7.
If required, enable deletion of document after sending:
(a) Press Erase Tx Doc.
Press ON.
(b)
(c) Press Enter.
NOTE
When Erase Tx doc is set to ON, the document is deleted after a polling
transmission.
8. If required, register an ID Code:
(a) Press I.D.Code.
(b) Enter an ID Code number (4 digits) using the numeric keypad.
NOTE
The ID code is not displayed, write it down and keep it safe!
(c) Press Enter.
Operation > 93