Table of Contents
Advertisement
7.
To use Actkey in Local PC mode (i.e. push scanning), it must be set as the program
to handle scanner events:
NOTE
The following example uses Windows XP. The steps may vary if you are using
any other operating system, but the principle is the same.
Select Start > Control Panel.
(a)
(b)
Double-click Scanners and Cameras.
(c)
Right-click the MFP icon and click Properties.
(d)
Select the Events tab.
(e)
Choose an event from the Select an event drop-down menu.
(f)
In the Actions field, click Start this program and choose ActKey from the
drop-down menu.
Click Apply.
(g)
(h)
Repeat steps
PC-Fax.
Click OK to confirm.
(i)
e
to
g
for each event, e.g. Scan to Application, E-mail, Folder and
Getting started > 22
Advertisement
Table of Contents
